CPW operates four pipes mills (one 7” ERW/HFI mill, one 26” ERW/HFI mill, one 100” SAWH mill and one 56” LSAW mill). Downstream from the pipe mills CPW operates two external and one internal Coating mills
 
The latest investment of LSAW/JCOE pipe mill, supplied by SMS-Meer,intends tocover the increasing needs for offshore and deep offshore pipelines.

Further information of our pipe production units as mentioned here below:
 
7’’ ERW/HFI unit: The annual production capacity of this unit is 150.000 tons with below technical characteristics:
Outside diameter: 2” - 7 5/8”
Wall thickness: up to 10mm
Steel Grades: up to S355J2H
Lengths: up to 14m

26” ERW/HFI unit: The annual production capacity of this unit is 400.000 tons with below technical characteristics:
Outside diameter: 8 5/8” - 26”
Wall thickness: up to 1"
Steel Grades: up to X80
Lengths: up to 23.2m

100” SAWH unit: The annual production capacity of this unit is 375.000 tons with below technical characteristics:
Outside diameter: 26” - 100”
Wall thickness: up to 1"
Steel Grades: up to X80
Lengths: up to 18m

56” LSAW unit: The annual production capacity of this unit is 400.000 tons with below technical characteristics (available from Q2-2015):
Outside diameter: 16” - 56”
Wall thickness: up to 40mm
Steel Grades: up to X100
Lengths: up to 18m
 

Coating & Lining mills

  External Coating Internal Coating
  1st Line 2nd Line  
Line TCP 40” TCP 100” TLP 56”
Outside diameter 4 1/2” - 40” 8 5/8” - 100” 8 5/8” - 56”
Maximum Length 18m 23,2m 18m
Capacity 6.300.000sq.m 2.000.000sq.m